Cisco 500 series Administration Manual page 140
Stackable managed switch
Hide thumbs
Also See for 500 series:
- Configuration manual (1140 pages) ,
- Administration manual (653 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Configuring Discovery
Configuring CDP
STEP 1
STEP 2
Cisco 500 Series Stackable Managed Switch Administration Guide
Displaying CDP Local Information
To view information that is advertised by the CDP protocol about the local device:
Click Administration > Discovery - CDP > CDP Local Information. The
Local Information
page opens.
Select a local port, and the following fields are displayed:
•
Interface—Number of the local port.
•
CDP State—Displays whether CDP is enabled or not.
•
Device ID TLV
-
Device ID Type—Type of the device ID advertised in the device ID TLV.
-
Device ID—Device ID advertised in the device ID TLV.
•
System Name TLV
-
System Name—System name of the device.
•
Address TLV
-
Address1-3—IP addresses (advertised in the device address TLV).
•
Port TLV
-
Port ID—Identifier of port advertised in the port TLV.
•
Capabilities TLV
-
Capabilities—Capabilities advertised in the port TLV)
•
Version TLV
-
Version—Information about the software release on which the device is
running.
•
Platform TLV
-
Platform—Identifier of platform advertised in the platform TLV.
•
Native VLAN TLV
-
Native VLAN—The native VLAN identifier advertised in the native VLAN
TLV.
9
CDP
140
Advertisement
Table of Contents
