Chapter 3 - Input/Output Settings; Power Up Beeper; Beep On Bel Character - Honeywell 8680i User Manual

CHAPTER
INPUT/OUTPUT SETTINGS
3

Power Up Beeper

The 8680i can be programmed to beep when it's powered up. Scan the Off bar code
if you don't want a power up beep. Default = Power Up Beeper On - Scanner.
Power Up Beeper Off -

Beep on BEL Character

You may wish to force the 8680i to beep upon a command sent from the host. If
you scan the Beep on BEL On bar code below, the 8680i beeps every time a BEL
character is received from the host. Default = Beep on BEL Off.
8680i User Guide
Scanner
*Beep on BEL Off
* Power Up Beeper On -
Scanner
Beep on BEL On
41