Signal Input Settings (Input Menu) - Sony DVS-9000 User Manual

2
Select the M/E you want to logically set to the PGM/PST from the
<Logical M/E to Physical P/P> group.
P/P: Assign the physical PGM/PST as logical PGM/PST.
M/E-1: Assign the physical PGM/PST as logical M/E-1.
M/E-2: Assign the physical PGM/PST as logical M/E-2.
M/E-3: Assign the physical PGM/PST as logical M/E-3.
Setting the assignments of DME channels to use on the
individual M/E banks
The Switcher >Config >DME Config menu allows you to select the DME
channels to use on the M/E and PGM/PST banks for processed keys or DME
wipes.
1
In the Switcher >Config menu, press [DME Config].
The DME Config menu appears.
2
Using either of the following methods, select the M/E or PGM/PST bank
for which you want to set a DME channel assignment.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
3
In the <DME Channel> group, press one of the [Ch1] to [Ch8] buttons
turning it on.
4
Repeat steps 2 and 3 to assign DME channels to other banks.

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher >Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
Making phase adjustment and through mode settings
1
In the Switcher >Input menu, select the input signal to which the settings
apply.
• Press directly on the list in the status area.
Setup Relating to Switcher Processor
365