Sony DVS-9000 User Manual page 428

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
1
2
a) When the MKS-2700 is connected, select 2 for the slot and a value in the range 1 to 36 for
the port.
b) When the MKS-2700 is connected, select a value in the range 1 to 36.
3
Press [Set].
The Set menu appears.
4
In the <Source/Destination> group, select the tally type.
Src: Return a tally to all sources output to the destination.
Dest: Return a tally to the destination outputting the source to which a
source tally is returned.
5
Set the destination address and level.
The level setting is only required when in step 4 you selected Destination.
Knob
1
2
6
When setting the tally type, set the following parameter.
Knob
3
a) 1:R1, 2:G1, 3:R2, 4:G2, 5:R3, 6:G3, 7:R4, 8:G4, 9:R5, 10:G5, 11:R6, 12:G6, 13:R7,
14:G7, 15:R8, and 16:G8. (R is an abbreviation of "Red Tally," and G of "Green Tally.")
7
Press [Execute].
This makes the parallel tally settings, in accordance with the settings in
steps 1 to 6.
Deleting parallel tally settings
1
In the Router/Tally >Parallel Tally menu, using any of the following
methods, select the parallel tally whose settings you want to delete.
Parameter Adjustment
Slot No Parallel tally slot number
Port No Parallel tally port number
Parameter Adjustment
Address Destination address
Level Destination level
Parameter Adjustment
Type Tally type
Setting values
2 to 6
1 to 54
Setting values
1 to 1024
1 to 8
Setting values
1 to 16
Setup Relating to Router Interface and Tally
a)
b)
a)
427