Wind Settings - Sony DVS-9000 User Manual

• When you change the selection in the <Combine Process> group, the
• When you do not combine images, the Keyframe Strobe effect only is
Select one of the following in the <Combine Process> group.
Combine –> KF STRB: Add the Keyframe Strobe effect after the combine.
KF STRB –> Combine: Add the Keyframe Strobe effect before the combine.

Wind Settings

This effect strobes the image at regular intervals, and moves the frozen image
in a fixed direction, leaving an afterimage.
For example images, "DME Special Effects" in Chapter 1 (Volume 1).
Notes
• The wind function is not supported on the MVE-8000A.
• When wind is turned on, any of the following effects that are on are turned
Applying the wind effect
1
2
3
112
DME Special Effect Operations
afterimages which had been added up to then disappear.
applied, regardless of the selection in the <Combine Process> group.
As parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
Parameters can be set independently for each channel.
off.
– Trail
– Motion decay
– Keyframe strobe
In the DME menu, select VF5 'Light/Trail' and HF5 'Wind.'
The Wind menu appears.
Press [Wind], turning it on.
This enables the wind, and you can now adjust the parameters with the
knobs.
Set the following parameters.
Knob Parameter
1 Decay
Adjustment
Amount of afterimage
displayed
Setting values
a)
0.00 to 100.00