Motion Decay Settings - Sony DVS-9000 User Manual

Trail –> Combine: Add the Trail effect before the combine. Trails parameters
Combine –> Trail

Motion Decay Settings

When the video image is a moving image, you can blur the motion by creating
motion trails (or afterimages).
For sample images, see "DME Special Effects" in Chapter 1 (Volume 1).
Note
When you turn on motion decay, if the Trail, Keyframe Strobe or Wind effect
is on, it automatically goes off.
Blurring image motion
1
2
3
108
DME Special Effect Operations
can be set independently for each channel.
In the DME menu, select VF5 'Light/Trail' and HF3 'Motion Decay.'
The Motion Decay menu appears.
Press [Motion Decay], turning it on.
This enables motion decay, and you can now use the knobs to adjust the
parameters.
Set the following parameter.
Knob Parameter Adjustment
1 Video Decay Degree of blurring of the video
signal
Trail –> Combine
Setting values
0.00 to 100.00
a)