Sony DVS-7000A Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Switch
  5. DVS-7000A
  6. Installation manual
Sony DVS-7000A Installation Manual

Sony DVS-7000A Installation Manual

Digital video switcher, type-3d switcher control panel, type-4d switcher control panel
Hide thumbs Also See for DVS-7000A:
Table of Contents

Advertisement

Quick Links

Download this manual
DIGITAL VIDEO SWITCHER
DVS-7000A
TYPE-3D SWITCHER CONTROL PANEL
BKDS-7011/7011R/7011LR
BKDS-7012
TYPE-4D SWITCHER CONTROL PANEL
BKDS-7021/7021R/7021LR
BKDS-7022/7022R/7022LR
BKDS-7023/7023R/7023LR
BKDS-2031
BKDS-2032
BKDS-2041
BKDS-2070
BKDS-7001
BKDS-7030
BKDS-7031
BKDS-7032
BKDS-7033
INSTALLATION MANUAL
1st Edition
BKDS-7075
BKDS-7090
BKDS-7103
BKDS-7110
BKDS-7111
BKDS-7113
BKDS-7133
BKDS-7161
BKDS-7163
BKDS-7270
BKDS-7271
BKDS-7280
BKDS-7420
BKDS-7445
BKDS-7690
BZS-7020A

Advertisement

Table of Contents
loading

Related Manuals for Sony DVS-7000A

Summary of Contents for Sony DVS-7000A

  • Page 1 DIGITAL VIDEO SWITCHER DVS-7000A TYPE-3D SWITCHER CONTROL PANEL BKDS-7011/7011R/7011LR BKDS-7012 TYPE-4D SWITCHER CONTROL PANEL BKDS-7021/7021R/7021LR BKDS-7022/7022R/7022LR BKDS-7023/7023R/7023LR BKDS-2031 BKDS-7075 BKDS-7270 BKDS-2032 BKDS-7090 BKDS-7271 BKDS-2041 BKDS-7103 BKDS-7280 BKDS-2070 BKDS-7110 BKDS-7420 BKDS-7001 BKDS-7111 BKDS-7445 BKDS-7030 BKDS-7113 BKDS-7690 BKDS-7031 BKDS-7133 BZS-7020A BKDS-7161 BKDS-7032...
  • Page 2 électrique, d’incendie ou de blessure n’effectuer que les réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres. Pour toute réparation faire appel à une personne compétente uniquement. DVS-7000A Serial No. 10001 and Higher BKDS-7031 Serial No.
  • Page 3 WARNING This unit has no power switch. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power cord to a socket-outlet which must be provided near the unit and easily accessible, so that the user can turn off the power in case a fault should occur.

  • Page 5: Table Of Contents

    Input and Output Signals of Connectors ............. 1-3 1-4-1. DVS-7000A................1-3 1-4-2. Control Panel ................1-6 1-5. Examples of System Connection .............. 1-11 2. Installation of DVS-7000A 2-1. External Dimensions ................... 2-1 2-2. Rack Mounting .................... 2-2 3. Installation of Control Panel 3-1.
  • Page 6 Function of Optional Boards ............4-4 4-2-2. Relation between Optional Boards and Rear Panel Connectors ............... 4-4 4-3. Installation of Options for DVS-7000A ............4-6 4-3-1. Detaching and Attaching of Front Panel ........4-6 4-3-2. Inserting/Pulling Out of Plug-in Boards ........4-7 4-3-3.

  • Page 7: Manual Structure

    Manual Structure Purpose of this manual This manual is the installation manual of Digital Video Switcher DVS-7000A. This manual is intended for use by trained system and service engineers, and describes the information when installing DVS-7000A. About the model names of the control panels This manual is described the model name of the control panels as shown the table below.

  • Page 8: Contents

    This section describes the operating environment, power supply, connectors, input and output signals of connectors, and example of system connection. Section 2 Installation of DVS-7000A This section describes the external dimensions and rack mounting. Section 3 Installation of Control panel This section describes the external dimensions, installation space, rack mounting and replacement of key tops.

  • Page 9: Related Manuals

    This manual describes the overview, system configuration examples and specifications of options..Maintenance Manual Part 1 (Supplied with DVS-7000A) This manual describes the information for the periodic maintenance, and the information for the service with predicated on the replacement of the principal blocks and mounted circuit boards.

  • Page 11: Installation

    . Install the unit in a well ventilated place to prevent a temperature rise in the unit. Never cover the ventilation The power cords are not supplied with DVS-7000A, the holes of the outer frame. control panels. Be sure to use the power cords that are .

  • Page 12: Connectors

    (*2) : The BVS cables are supplied with the models in the list below. ME-1 to 3 OUTPUTS PGM OUTPUTS 1 to 4 (*3) : Use the 9-pin BNC conversion cable supplied with DVS-7000A. CLEAN OUTPUT PST OUTPUT Model name...

  • Page 13: Input And Output Signals Of Connectors

    1-4. Input and Output Signals of Connectors The input and output signals of the connectors on the rear panel are specified in the following table. And refer to the following illustration for the pin positions of the connectors. 1-4-1. DVS-7000A SERIAL TERMINAL...
  • Page 14 Transmitted data (_) ’ (*4) : If connecting Sony s Routing Switcher DVS-V6464B, use the 9-pin BNC conversion cable supplied with DVS-7000A. Frame Ground EDITOR A/REMOTE 1 : RS-422A (D-sub 9-pin.Female) DME 1 to 4 : RS-422A (D-sub 9-pin.Female) <DEVICE>...
  • Page 15 1-4. Input and Output Signals of Connectors TERMINAL : RS-232C (D-sub 9-pin.Female) GPI : (D-sub 25-pin.Female) INPUT x 8, TTL to Terminal OUTPUT x 4, relay contact 30 V 0.1 A (resistance load) Pin No. Signal Name Function OUTPUT x 4, open collector 30 V rated voltage Data Carrier detect (*7) GPI timing : Refer to User’s Guide...

  • Page 16: Control Panel

    Rear panel (*1) <CONTROLLER> : Controlling device 1. Main Panel SWITCHER : RS-422A (D-sub 9-pin.Female) DME : RS-422A (D-sub 9-pin.Female) (*1) (*1) <CONTROLLER> to Processor DVS-7000A <CONTROLLER> to Digital multi effects DME-3000/ 7000 etc. Pin No. Signal Name Function Pin No.
  • Page 17 1-4. Input and Output Signals of Connectors REMOTE 1 : RS-422A (D-sub 9-pin.Female) DISPLAY PANEL : (D-sub 25-pin.Female) <CONTROLLER> (*1) to External Device to Display panel Pin No. Signal Name Function Pin No. Signal Name Function Frame ground Ground +12 V Power supply +12 V RX-A Received data (_)
  • Page 18 1-4. Input and Output Signals of Connectors AUX PANEL : (D-sub 25-pin.Female) GPI : (D-sub 25-pin.Female) INPUT x 8, TTL to AUX panel OUTPUT x 4, relay contact 30 V 0.1 A (resistance load) Pin No. Signal Name Function OUTPUT x 4, open collector 30 V rated voltage Ground GPI timing : Refer to User’s Guide +12 V...
  • Page 19 1-4. Input and Output Signals of Connectors OPTION PANEL : (D-sub 25-pin.Female) 2. Display Panel _ : (D-sub 25-pin.Female) to Adaptor box (BKDS-7075) from Main panel Pin No. Signal Name Function Pin No. Signal Name Function Ground Ground +12 V Power supply +12 V +12 V Power supply +12 V...
  • Page 20 1-4. Input and Output Signals of Connectors 3. AUX Bus Panel AUX PANEL : (D-sub 25-pin.Female) from Main panel Pin No. Signal Name Function Ground +12 V Power supply +12 V SCLK Serial colck for switch read and LED light Ground LED light data IWLD...

  • Page 21: Examples Of System Connection

    1-5. Example of System Connection 1-5. Examples of System Connection 1. D1 LIVE SWITCHER SYSTEM 1-11 DVS-7000AE IM...
  • Page 22 1-5. Example of System Connection 2. D2 LIVE SWITCHER SYSTEM 1-12 DVS-7000AE IM...

  • Page 23: Installation Of Dvs-7000A

    Section 2 Installation of DVS-7000A 2-1. External Dimensions 477.8 28.5 37.7 403.2 250.8 111.1 8-M4 Unit : mm DVS-7000AE IM...

  • Page 24: Rack Mounting

    2-2. Rack Mounting 2-2. Rack Mounting DVS-7000A can be mounted in a 19-inch standard rack. Be sure to use the optional rack mount rail RMM-18DV. Required Parts . Rack mount rail (RMM-18DV) . Screw for plate nut (long) installing (B4 x 8) : 8pcs .
  • Page 25 (Fig. 1) (Fig. 2) (2) Secure the inner member to the unit by the sixteen screws (B4 x 8) supplied with DVS-7000A. Remove the feet of the unit as required. (Fig. 2) (3) Secure the bracket to the outer member 1 by the preparated eight screws (B4 x 8). (Fig. 3) To see the screw hole of the outer member 1, move the outer member 1 back-and-forth.
  • Page 26 (6) After confirming that the unit can be moved smoothly, tighten the screws (C4 x 12) temporarily secured in the step (4). (Fig. 5) Rack Outer member2 . When housing the set, shift the slide bearing as illustrated. Inner member Outer member2 Slide bearing Stopper DVS-7000A Inner member (Fig. 5) DVS-7000AE IM...
  • Page 27 Ornamental washer RK5 x 16 DVS-7000A Ornamental washer (Fig. 6) . When DVS-7000A is mounted in a rack, the maximum traveling distance is illustrated below. Handle height Maximum moving distance Distance to slide rail center Set height when mounted in rack...

  • Page 29: Installation Of Control Panel

    Section 3 Installation of Control Panel 3-1. External Dimensions Main Panel BKDS-7011/7012 1290 1200 Unit : mm * The above figure shows the BKDS-7011. DVS-7000AE IM...
  • Page 30 3-1. External Dimensions Main Panel BKDS-7011R 1142 1052 Unit : mm DVS-7000AE IM...
  • Page 31 3-1. External Dimensions Main Panel BKDS-7011LR Unit : mm DVS-7000AE IM...
  • Page 32 3-1. External Dimensions Main Panel BKDS-7021/7022/7023 1290 1200 Unit : mm * The above figure shows the BKDS-7021. DVS-7000AE IM...
  • Page 33 3-1. External Dimensions Main Panel BKDS-7021R/7022R/7023R 1142 1052 Unit : mm * The above figure shows the BKDS-7021R. DVS-7000AE IM...
  • Page 34 3-1. External Dimensions Main Panel BKDS-7021LR/7022LR/7023LR Unit : mm * The above figure shows the BKDS-7021LR. DVS-7000AE IM...
  • Page 35 3-1. External Dimensions Display Panel 49.5 4-M4 Unit : mm BKDS-7075 (BKDS-7011R/7021R/7022R/7023R/7011LR/7021LR/7022LR/7023LR) 2-M4 Unit : mm DVS-7000AE IM...
  • Page 36 3-1. External Dimensions AUX Bus Panel BKDS-7021/7022/7023/7021R/7022R/7023R 2-M4 Unit : mm AUX Bus Panel BKDS-7021LR/7022LR/7023LR 2-M4 Unit : mm DVS-7000AE IM...

  • Page 37: Installation Space

    3-2. Installation Space 3-2. Installation Space Control panel can be installed in the console by drilling holes in the console in the locations specified below. BKDS-7011/7012 BKDS-7011/7012 Hole Approx.73˚ 11-M4 ( 47 ) When installing BKDS-7011/7012 in the console, make a hole on the 1265 14.5 console for the connecting cable...
  • Page 38 3-2. Installation Space BKDS-7011R BKDS-7011R/7012R Hole Approx.73˚ 11-M4 ( 53 ) When installing BKDS-7011R in the console, make a hole on the 1117 14.5 console for the connecting cable 1146 between main panel and display panel. BKDS-7021R/7022R/7023R BKDS-7021R/7022R/7023R Hole Approx.73˚ 11-M4 ( 53 ) 1117...
  • Page 39 3-2. Installation Space BKDS-7011LR S-7011LR/7012LR Hole Approx.73˚ 11-M4 ( 52.5 ) BWhen installing BKDS-7011LR 333.5 333.5 in the console, make a hole on the 14.5 console for the connecting cable between main panel and display panel. S-7021LR/7022LR/7023LR BKDS-7021LR/7022LR/7023LR Hole Approx.73˚ 11-M4 ( 52.5 ) 333.5...

  • Page 40: Installation Of Main Panel

    3-3. Installation of MAIN PANEL 3-3. Installation of MAIN PANEL (1) Be sure to install the main panel to the rack with three-person or more. (2) Be sure to install the panel in the following procedures. Prepared Part . Screws (B4 x 6) BKDS-70xx/70xxR : 11 pcs BKDS-70xxLR : 10 pcs...

  • Page 41: Installation Of Display Panel

    3-4. Installation of DISPLAY PANEL 3-4. Installation of DISPLAY PANEL <BKDS-701x, 701xR and 701xLR> (1) Only BKDS-701xR and 701xLR, secure the EL unit bracket to BKDS-701x, 701xR and 701xLR by the two screws (B4 x 6) supplied with BKDS-701x, 701xR and 701xLR. (2) Secure the EL table assembly to BKDS-701x, 701xR and 701xLR by the four screws (B4 x 6) supplied with BKDS-701x, 701xR and 701xLR.

  • Page 42: Installation Of Aux Bus Panel (Only Bkds-702X, 702Xr And 702Xlr)

    3-5. Installation of AUX BUS PANEL (Only BKDS-702x, 702xR and 702xLR) 3-6. Installation of Ten Key Unit (Only BKDS-70xxR/70xxLR) 3-7. Connection of Control Panel 3-5. Installation of AUX BUS PANEL (Only BKDS-702x, 702xR and 702xLR) Secure to the console by the four screws (M4). 3-6.

  • Page 43: Replacement Of Key Tops

    3-8. Replacement of Key Tops 3-8. Replacement of Key Tops The control panels are supplied with a cap pull tool. Remove or install the key top in the following procedures. For removing the key tops, use the cap pull tool. Part number: 3-179-054-01 (1) Push down the key top on both sides and insert the cap pull tool in the gap between key and sides.

  • Page 45: Installation Of Options

    Section 4 Installation of Options Optional Equipments for DVS-7000A Option Function name BKDS-7103 (DI-36 board) 12Input Serial Digital Board BKDS-7110 (ADC-21 board) Blank Input Adaptor Board BKDS-7111 (ADI-3 board) Analog Composite Input Board BKDS-7113 (DI-34 board) Serial Digital Input Board...

  • Page 46: Installation Of Plug-In Boards

    The board name are displayed near the eject lever at the left side on the A side of each plug-in board. The slot numbers that can be installed the board are displayed on the inside of the front panel of DVS-7000A.
  • Page 47 4-1. Installation of Plug-in Boards Plug-in Boards Slot No. Option Board Standard Board Function Name 1 CPU-264A board 1 System control board 2 IF-758 board 2 Interface board 3 MEM-94 board 3 Memory board 4 CA-35A board 4 Application board 5 CPU-264 board 5 System control board 6 BKDS-7420...

  • Page 48: Combination Of Optional Boards

    (BKDS-7110). . The names for the ADI-3 and DI-34 boards printed on the ADC-21 board mean the name of the input connector for DVS-7000A. 2. Output . The analog composite output can be used if installing DA-94 board (BKDS-7161) onto the OUT-9 board.
  • Page 49 4-2. Combination of Optional boards Output Input : When using BKDS-7110 (ADC-21 board) Slot Optional Parent Board Rear Panel Connector Slot Optional Parent Board Rear Panel Connector Output Board OUT-9 Input Board ADC-21 DA-94 (*1) CN1, 2 AUX BUS OUTPUT 1 ADI-3 (*3) CN101, 102...

  • Page 50: Installation Of Options For Dvs-7000A

    4-3. Installation of Options for DVS-7000A 4-3. Installation of Options for DVS-7000A This section is described the installation procedures of the optional equipments that are installed to DVS- 7000A. 4-3-1. Detaching and Attaching of Front Panel (1) Loosen the four locking screws on the front panel using a flatblade screwdriver.

  • Page 51: Inserting/Pulling Out Of Plug-In Boards

    4-3. Installation of Options for DVS-7000A 4-3-2. Inserting/Pulling Out of Plug-in Boards To avoid shock hazards and/or damage to the boards, be sure to turn off the power switch before inserting or pulling out the plug-in boards. (1) Detach the front panel. (Refer to “4-3-1. Detaching and Attaching of Front Panel”.) (2) Remove the twelve screws, the two board retainer and the one board holder.
  • Page 52 4-3. Installation of Options for DVS-7000A Removal (3) Open the eject levers of the plug-in board in the direction of the arrows 1. (4) Pull out the plug-in board from the unit. Pull out the plug-in board with a equal force for both eject levers.

  • Page 53: Installation Of Optional Boards

    4-3. Installation of Options for DVS-7000A 4-3-3. Installation of Optional Boards There are the three installation types of the optional boards in DVS-7000A. <Type 1> The type that the optional board is inserted in the slot. <Type 2> The type that the optional board is connected onto the connector of the pre-installed board and is secured by the screws.
  • Page 54 4-3. Installation of Options for DVS-7000A Install the optional board to the pre-installed board or the optional board in the following procedures. (1) Remove the eleven screws secured to the pre-installed board, shield plate and dummy plate. PTTWH3 x 6...
  • Page 55 4-3. Installation of Options for DVS-7000A <Type 3> This Type’s Optional Boards Slot No. Optional board Pre-installed board 7, 9, 11 UP-10 board( BKDS-7280) MIX-35 board WKG-12 board (BKDS-2070) 12, 13 DA-94 board (BKDS-7161) OUT-9 board SD-48 board (BKDS-7163) 16 to 18...

  • Page 56: Installation Of Bkds-7690 (Redundant Power Supply Unit)

    4-3. Installation of Options for DVS-7000A 4-3-4. Installation of BKDS-7690 (Redundant Power Supply Unit) To avoid shock hazards, be sure to turn off the breaker at the outside of DVS-7000A or unplug the power cord when installing BKDS-7690. Contents Power unit...

  • Page 57: Installation Of Options For Control Panel

    4-4. Installation of Options for Control Panel 4-4. Installation of Options for Control Panel This section is described the installation procedures of the optional equipments that are installed to the control panel. To avoid shock hazards and/or damage to the boards, be sure to turn off the breaker at the outside of the unit or unplug the power cord when installing the optional equipments.

  • Page 58: Turning On/Off The Power Switch

    4-4. Installation of Options for Control Panel (1) Loosen the screws of the slide knobs at both sides of the panel. (2) Move the slide knobs forward and release the locks. (3) Push up the panel and open it. Control panel Slide knob Slide knob Slide knob...

  • Page 59: Installation Of Bkds-7001 (Control Port Expansion Board)

    4-4. Installation of Options for Control Panel 4-4-3. Installation of BKDS-7001 (Control Port Expansion Board) Contents IF-523 board : 1pc Screw (PSW3 x 8) : 2pcs (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) Turn off the power switches in the control panel. (Refer to “4-4-2.

  • Page 60: Installation Of Bkds-7031 Track Ball

    4-4. Installation of Options for Control Panel 4-4-4. Installation of BKDS-7031 Track Ball Contents DME panel (KY-329 board) : 1 pc Track ball : 1 pc Harness (CTRL5) : 1 pc Harness (DC9) : 1 pc Screws (PSW3 x 8) : 4 pcs For BKDS-7031 is installed to the control panel, refer to “4-4-5.
  • Page 61 4-4. Installation of Options for Control Panel (3) Turn the ball retainer clockwise to lock. Ball retainer 4-17 DVS-7000AE IM...

  • Page 62: Installation Of Option Panels (Bkds-7030/7031/7032/7033)

    4-4. Installation of Options for Control Panel 4-4-5. Installation of Option Panels (BKDS-7030/7031/7032/7033) Contents of BKDS-7030 Key Frame Control Panel Unit (KY-328 board) : 1 pc Harness (CTRL5) : 1 pc Harness (DC9) : 1 pc Screws (PSW3 x 8) : 4 pcs Contents of BKDS-7031 DME Control Panel Unit (KY-329 board) : 1 pc...
  • Page 63 4-4. Installation of Options for Control Panel 1. Installation to Main Panel (BKDS-701x) (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) Turn off the power switch in the control panel. (Refer to “4-4-2. Turning On/Off the Power Switch”.) (3) Remove the four screws (PWH3 x 8) securing to the blank panel and the blank panel in the direction of the arrow.
  • Page 64 4-4. Installation of Options for Control Panel (4) Disconnect the harness from the CN1 on the KY-324 board. Clamp KY-324 board Harness (5) To change the position of the KY-324 board, remove the four fixing screws (PWH3 x 8) KY-324 board then remove the KY-324 board in the direction of arrow.
  • Page 65 4-4. Installation of Options for Control Panel (6) Place the option panel and the KY-324 board to the desired position with the supplied screws or the four screws (PSW3 x 8) removed from the KY-324 board. Option panel (or KY-324 board) PWH3 x 8 PWH3 x 8 PWH3 x 8...
  • Page 66 4-4. Installation of Options for Control Panel (8) Connect two harnesses (CTRL5 and DC9) as shown in the figure below. Also, when using the adapter box (BKDS-7075), connect the harness (CTRL10) which is supplied with adapter box (BKDS-7075) as shown in the figure below. CPU-263 board KY-320 board Harness (DC9)
  • Page 67 4-4. Installation of Options for Control Panel 2. Installation to Main Panel (BKDS-702x) (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) Turn off the power switch in the control panel. (Refer to “4-4-2. Turning On/Off the Power Switch”.) (3) Remove the blank panel.
  • Page 68 4-4. Installation of Options for Control Panel (5) Connect two harnesses (CTRL5 and DC9) as shown in the figure below. Also, when using the adapter box (BKDS-7075), connect the harness (CTRL10) which is supplied with adapter box (BKDS-7075) as shown in the figure below. CPU-263 board KY-322 board KY-324 board...
  • Page 69 4-4. Installation of Options for Control Panel 3. Installation to Main Panel (BKDS-7011R/7011LR) (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) Turn off the power switch in the control panel. (Refer to “4-4-2. Turning On/Off the Power Switch”.) (3) Remove the blank panel.
  • Page 70 4-4. Installation of Options for Control Panel (6) Connect the harness (CTRL11) supplied with the control panel between CN2 (12-pin) of the option panel and CN18 (12-pin) on the CN-1143 board. (7) Connect the harness (DC12)supplied with the control panel between CN3 (6-pin) of the option panel and CN4 (6-pin) on the KY-320 board.
  • Page 71 4-4. Installation of Options for Control Panel 4. Installation to Adaptor Box (BKDS-7075) (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) Turn off the power switches A and B in the control panel. (Refer to “4-4-2. Turning On/Off the Power Switch”.) (3) Remove the two screws and the AD panel.
  • Page 72 4-4. Installation of Options for Control Panel (5) Connect the three harnesses of the IF-629 board to the CN1 through CN3 on the KY-328 board. KY-325/328/329 board IF-629 board White (6) Secure the AD panel to the adaptor box by the two screws. (7) Turn on the power switches A and B in the control panel.

  • Page 73: Joining Of Bkds-7075 (Control Panel Remote Adaptor)

    4-4. Installation of Options for Control Panel 4-4-6. Joining of BKDS-7075 (Control Panel Remote Adaptor) Contents Adaptor : 1pc Joint : 2pcs Joint bracket : 6pcs Nylon rivet : 2pcs Screws (B 3 x 5) : 6pcs BKDS-7075s can be joined the vertical direction, the horizontal direction or the vertical and horizontal directions as shown in the following figure.
  • Page 74 4-4. Installation of Options for Control Panel 1. Removal and Installation of IF-629 Board (1) Remove the AD panel. (Refer to the step (3) of “4. Installation to Adaptor Box (BKDS-7075)” in the section 4-4-5.) (2) Remove the caps and the IF-629 board. (Refer to “5.
  • Page 75 4-4. Installation of Options for Control Panel 2. Joining of Adaptor Box (BKDS-7075) (1) Join the two adaptor boxes (BKDS-7075). (2) Press in the nylon rivet as shown in the following figure. (3) Press in the two joint brackets as shown in the following figure. (In the case of the vertical direction) Joint bracket Joint bracket...
  • Page 76 4-4. Installation of Options for Control Panel (4) Lock the two adaptor boxes by pressing down the joint brackets. Joint bracket 3. Joining of AD Panel In the case of the horizontal direction, join the two AD panels in the following procedures. (1) Place the two AD panels as shown in the following figure.

  • Page 77: Installation Of Bkds-7090 (Redundant Power Supply Unit)

    4-4. Installation of Options for Control Panel 4-4-7. Installation of BKDS-7090 (Redundant Power Supply Unit) To avoid shock hazards, be sure to turn off the breaker at the outside of the control panel or unplug the power cord when installing BKDS-7090. Contents Power unit : 1pc...

  • Page 79: Confirmation In Installation

    Section 5 Confirmation in Installation 5-1. Switch Settings on Boards and LEDs Description The addresses on the boards are shown by ( ) marks. 5-1-1. DVS-7000A 1. CA-35A Board CT501 D509 D510 D513 D508 D507 D506 (Component side/A side) CA-35A board CN1 (E8) : FRAME MEMORY BOARD connector This connector is reserved for future system expansion.
  • Page 80 5-1. Switch Settings on Boards and LEDs Description D508 (Yellow color) (A7) : D1/D2 lamp This LED is displayed that the SYSTEM is selected into the D1 or D2 format. This LED lights that the SYSTEM is selected into the D1 format. D509 (Yellow color) (A7) : 625/525 This LED is displayed that the SYSTEM is selected into the 525 or 625 line mode.
  • Page 81 5-1. Switch Settings on Boards and LEDs Description 2. CPU-264 Board CNT7 CNT6 CNT4 D100 CNT3 D101 (Component side/A side) CPU-264 board CNT3 (B5) : +5 V TEST terminal This terminal is used to measure the +5 V voltage. When re-adjusting the voltage after installing the option board to the unit, this terminal is used. CNT4 (B5) : +3 V TEST terminal This terminal is used to measure the +3 V voltage.
  • Page 82 5-1. Switch Settings on Boards and LEDs Description D1 through D8 (Green colors) (D5/E5) : STATUS displays These LEDs are used for the adjustment in the factory. D15 (Yellow color) (B5) : +5 V This LED is displayed the status of the +5 V source for all system. Light ;...
  • Page 83 5-1. Switch Settings on Boards and LEDs Description 3. RE-110 Board (BKDS-7690) CN202 CN201 CN205 CN203 CN204 CN206 CN207 CN208 RV201 RV202 RV203 CN210 RV204 (Component Side/A Side) RE-110 board RV201 (K4) : +5 V (A) adjustment RV202 (K4) : +5 V (B) adjustment RV203 (K5) : +3 V adjustment RV204 (K5) : _5 V adjustment 4.

  • Page 84: Bkds-7133

    5-1. Switch Settings on Boards and LEDs Description 5-1-2. BKDS-7133 1. ADC-22 Board CNX1 CNY1 CV700 CV500 CV600 CV100 CV200 CV300 (Component Side/A Side) ADC-22 board CV100 (D2) : CH1 G/Y frequency response adjustment CV200 (F2) : CH1 B/B-Y frequency response adjustment CV300 (H2) : CH1 R/R-Y frequency response adjustment CV500 (K3) : CH2 G/Y frequency response adjustment CV600 (M3) : CH2 B/B-Y frequency response adjustment...
  • Page 85 5-1. Switch Settings on Boards and LEDs Description COP1 (F2) : This is used to select the mode corresponding to the synchronized signal that is connected to the SWITCHER on the rear panel. Normaly, opened under. COP2 (G3) : Normaly, short-circuit the “NOR” side. S1 (G12) : RESET switch This switch is used to forcibly restart the SYSTEM by the hardware.
  • Page 86 5-1. Switch Settings on Boards and LEDs Description S5 (M1) : SUB CPU switch This switch is used to select the operation mode of SUB CPU. Selections in the factory : All OFF The addresses of the knobs are shown by marks.
  • Page 87 5-1. Switch Settings on Boards and LEDs Description D8 (Red color) (D2) : When the +3 V source provides to the CN17 on the CN-1148 board, this LED lights. D9 (Red color) (B2) : When the +3 V source provides to the CN18 on the CN-1148 board, this LED lights. D10 (Red color) (A2) : When the +3 V source provides to the CN19 on the CN-1148 board, this LED lights.
  • Page 88 5-1. Switch Settings on Boards and LEDs Description 4. KY-319 Board (Component Side/A Side) KY-319 board S1 (R4) : Board ID Setting Switch Set this switch as follows depending upon the M/E row position in which the KY-319 board is installed. Normaly, use the default settings when shipped from the factory.
  • Page 89 5-1. Switch Settings on Boards and LEDs Description 6. KY-321 Board (BKDS-7011/7021/7023/7011R/7021R/7023R/7011LR/7021LR/7023LR) (Component Side/A Side) KY-321 board S1 (N1) : Board ID Setting Switch Set this switch as follows depending upon the M/E row position in which the KY-321 board is installed. Normaly, use the default settings when shipped from the factory.

  • Page 90: Bkds-7090

    5-1. Switch Settings on Boards and LEDs Description 5-1-4. BKDS-7090 1. RE-112 Board (Component Side/A Side) RE-112 board D9 (Green color) (C4) : When the power is normal operated, this LED lights. When the following troubles come up, this LED light off. In the cases that one power unit is used.

  • Page 91: Adjustment Of Secondary Power Supply Voltage

    5-2-1. DVS-7000A DVS-7000A has the power sources of +5 V (A), +5 V (B), +3 V, and _5 V. For the voltage measurement of +5 V (A), +3 V, and _5 V and on the CPU-264 board and +5 V (B)or XPT-16 board the test terminals are provided that can be connected to the probe of a digital voltmeter.
  • Page 92 5-2. Adjustment of Secondary Power Supply Voltage (5) Connect the digital voltmeter between test terminals on the CPU-264 and the XPT-16 boards and confirm that the voltage value of each test connector meet the specification shown in the table below. If the specification does not meet, adjust the voltage by the adjustment potentiometers of the power unit B.

  • Page 93: Control Panel

    5-2. Adjustment of Secondary Power Supply Voltage 5-2-2. Control Panel The control panels have the power sources of +5 V, +3 V and +12 V. For the voltage measurement of +5 V, +3 V and +12 V, on the CN-1148 board the test terminals are provided that can be connected to the probe of a digital voltmeter.
  • Page 94 5-2. Adjustment of Secondary Power Supply Voltage (5) Connect the digital voltmeter between test terminals on the CN-1148 board and confirm that the voltage value meets the specification shown in the table below. If the specification does not meet, adjust the voltage by the adjustment potentiometer of the power unit B.

  • Page 95: Adjustment Of Operation Power For Fader Lever

    5-3. Adjustment of Operation Power for Fader Lever 5-3. Adjustment of Operation Power for Fader Lever Without removing the fader from the panel, the operation power of the fader lever is possible to adjust. (1) Open the panel. (Refer to “4-4-1. Opening and Closing of Panel”.) (2) When adjusting the fader lever (BKDS-7030) with installed to the adaptor box (BKDS-7075), remove the two screws and the AD panel.

  • Page 97: Initial Set-Up Of System

    Initial Set-up of System Before setting-up for DVS-7000A, the installation of operating program, the set-up required in the construction of the system and the saving of set-up data for DVS-7000A system are described. 6-1. Operation and Saving of Set-up Data This section is described the operation and the saving of the set-up data in the system.
  • Page 98 6-1. Operation and Saving of Set-up Data. The following data are saved the status that is displayed on the menu screen and are not changed by resetting or all-clearing the system. . Signal format (D2-525, D1-525 and D1-625) . Setting of resume function Nonvolatile memory DISK...
  • Page 99 6-1. Operation and Saving of Set-up Data. <Keys and Display of Control Panel> The keys and display are named as follows. . How keys are displayed : ex.) F1 (PANEL) This means that “PANEL” is indicated above the Function key F1 on the display. Control knobs 1~4 Display panel SET UP key...

  • Page 100: Installation Of Program (Bzs-7020A)

    6-2. Installation of Program (BZS-7020A) 6-2. Installation of Program (BZS-7020A) Before using DVS-7300/7350 system, the operating program of operation software BZS-7020A (option) is installed to the flash memory in the system. The program on the flash memory is not cleared by turning the power ON/OFF. If finishing this process, do not load this process till the version-up of the software is executed.

  • Page 101: Down Load Of Program

    6-2. Installation of Program (BZS-7020A) 6-2-1. Down Load of Program (1) Insert “OPERATING PROGRAM 1” (Switcher software) to the floppy disk drive. (2) In the set-up menu screen, press the keys on the display panel in the following sequence. [SETUP], [1] (SYSTEM), [F10] (INSTALL) The display for the function keys is changed as follows.
  • Page 102 6-2. Installation of Program (BZS-7020A) (4) Press [F9] (YES) key. The loading of the program starts. (5) When loading is completed, “Load Complete. Insert the OPERATING PROGRAM 2.” is indicated on the display, and the display for the function keys is changed as follows. EXEC (6) Insert the “OPERATING PROGRAM 2”...

  • Page 103: Initializing Of Data On Ram

    6-2. Installation of Program (BZS-7020A) 6-2-2. Initializing of Data on RAM (1) In the set-up menu screen, press the keys on the display panel in the following sequence. [SETUP], [1] (SYSTEM), [F6] (INITIALIZE) The display for the function keys is changed as follows. RESET ALL CLEAR PANEL...

  • Page 104: Initializing Of "Nonvolatile Memory

    6-2. Installation of Program (BZS-7020A) 6-2-3. Initializing of “Nonvolatile Memory” (1) In the set-up menu screen, press the keys on the display panel in the following sequence. [SETUP], [1] (SYSTEM), [F5] (BACKUP) The display for the function keys is changed as follows. BACKUP SETUP LOCK LOCK...

  • Page 105: Set-Up

    2. Setting of the Signal Format 3. Setting about System DVS-7000A has many set-up systems besides these settings. And the contents of the set-up can be saved to the floppy disk. For more details about contents and operation, refer to the following user's guide (option).
  • Page 106 6-3. Set-up 6-3-1. Confirmation of the Software Version (1) In the set-up menu screen, press the keys on the display panel in the following sequence. [SETUP], [1] (SYSTEM), [F7] (INFORMATION) The software’s and the “ROM”’s versions installed to each product are displayed. (2) Confirm that their versions.

  • Page 107: Setting About The System

    6-3. Set-up 6-3-3. Setting about the System (1) In the set-up menu screen, press the keys on the display panel in the following sequence. [SETUP], [1] (SYSTEM), [F3] (SYSTEM SETUP) The display for the function keys is changed as follows. SIGNAL SCREEN SWITCH...

  • Page 108: Saving Set-Up Data To Nonvolatile Memory

    6-3. Set-up In the case of the composite system EVEN EVEN : Even field ODD : Odd field In the case of the component system F1 : First field F2 : Second field (7) Press [F7] (RESUME), [F8] (PANEL RESUME) key to select the resume function. For the unit picks up where you left off when turning the power back ON, select the resume function to the ON.
  • Page 109 The material contained in this manual consists of and all other exposed metal parts for AC information that is the property of Sony Corporation and leakage. Check leakage as described below. is intended solely for use by the purchasers of the equipment described in this manual.
  • Page 110 Printed in Japan Sony Corporation DVS-7000A (SY) E 1999. 2 08 Broadcasting & Professional Systems Company ©1999 3-201-863-01...

This manual is also suitable for:

Bkds-7011Bkds-7011rBkds-7011lrBkds-7012Bkds-7021Bkds-7021r ... Show all

Table of Contents