Sony DVS-9000 User Manual page 82

2
Set the following parameters, depending on the selected modulation mode.
• When Radial mode is selected
Knob Parameter
1 Amp R
2 Freq R
3 a)
Offset R
4 b)
Speed R
5 Amp A
a) Set when Lock is on.
b) Set when Lock is off.
• When Angular mode is selected
Knob Parameter
1 Amp A
2 Freq A
3 a)
Offset A
4 b)
Speed A
5 Amp R
a) Set when Lock is on.
b) Set when Lock is off.
• When Both mode is selected
Knob Parameter
1 Amp R
2 Freq R
3 a)
Offset R
4 b)
Speed R
Adjustment
Ripple amplitude along radius
Ripple frequency along radius
Direction along radius in which
to offset ripple phase and
amount of movement
Ripple direction along radius
and speed
Ripple amplitude along
periphery
Adjustment
Ripple amplitude along periphery
Ripple frequency along periphery
Direction along periphery in which
to offset ripple phase and amount
of movement
Ripple direction along periphery
and speed
Ripple amplitude along radius
Parameter group [1/2]
Adjustment
Ripple amplitude along radius
Ripple frequency along radius
Direction along radius in which to
offset ripple phase and amount of
movement
Ripple direction along radius and
speed
Setting values
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
DME Special Effect Operations
81