Sony DVS-9000 User Manual page 81

To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
Knob
1
2
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
Ripple settings
Applies an effect like ripples moving across the image.
To apply the Ripple effect
With the Ripple menu displayed, use the following procedure.
1
80
DME Special Effect Operations
Parameter Adjustment
Form H Waveform in horizontal direction
Form V Waveform in vertical direction
In the <Mode> group, select the ripple modulation mode.
Radial: Points on radii of the same length from the center of the ripples
behave in the same way.
Angular: Points at the same angle from the center of the ripples behave in
the same way.
Both: Both Radial and Angular ripples are applied.
Shape: The ripples can have shapes such as stars or hearts in addition to
circles.
Modulation along radii
(Radial mode)
Modulation modes and directions
Setting values
a)
1 to 6
a)
1 to 6
Modulation along periphery
(Angular mode)