Executing An Effect In The Flexi Pad Control Block - Sony DVS-9000 User Manual

Specifying the effect execution direction
To specify the effect execution direction, press the [NORM] button or the
[REV] button, turning it on. When you press one, turning it on, the other
automatically goes off.
To execute the effect so as to obtain the effects of the [NORM] and [REV]
buttons alternately, press the [NORM/REV] button, turning it on.
When the [NORM] button is lit: The effect is executed in the direction from
the first keyframe to the last keyframe.
When the [REV] button is lit: The effect is executed in the direction from the
last keyframe to the first keyframe.
When the [NORM/REV] button is lit: Each time the effect is executed, the
direction reverses.
Executing an effect up to the next keyframe
1
Press the [STOP NEXT KF] button, turning it on.
2
Press the [RUN] button.
This executes the effect as far as the next keyframe. When the [REV]
button is lit, it is executed as far as the previous keyframe.
Repeating an effect
1
Press the [EFF LOOP] button, turning it on.
2
Press the [RUN] button.
This executes the effect repeatedly, from the first keyframe to the last
keyframe.
When the [REV] button is lit, the effect is executed in the reverse direction.
3
To stop the repeating effect, press the [EFF LOOP] button, turning it off,
or press the [REWIND] button.

Executing an Effect in the Flexi Pad Control Block

Executing an effect
To execute an effect recalled from the numeric keypad control block in the
Flexi Pad control block, use the following procedure.
1
In the Flexi Pad control block, press the [EFF] button.
213
Executing Effects