Sony DVS-9000 User Manual page 392

4
In the <Select> group, select the AUX bus or reentry to be assigned to the
DME channel.
Aux Bus: Set AUX bus.
Re-Entry: Set reentry.
5
Depending on the selection in step 4, use any of the following methods to
make the setting.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
– When Aux Bus is selected
Knob
2
– When Re-Entry is selected
Knob
2
6
Press [Set].
In the list on the right of the status area, the selected content is reflected in
the specified DME channel.
Repeat steps 3 to 6 as required.
Selecting the mode for turning off keys upon receiving the editor
command
Selects the mode for turning off keys when an "All Stop" command is received
from the editor.
1
In the Switcher >Device Interface menu, press [Editor I/F].
The Editor I/F menu appears.
2
Select one of the following modes.
All: When an "All Stop" command is received, all keys for the selected
regions are turned off.
Specified: When an "All Stop" command is received, among all the keys
for the selected regions, only the keys specified by the editor are
turned off.
Parameter Adjustment
Src No AUX bus number
Parameter Adjustment
Src No Reentry number
Setting values
0 to 48
Setting values
0 to 80
Setup Relating to Switcher Processor
391