Sony DVS-9000 User Manual page 122

a) For more information about the shape patterns, see "Shape Patterns" (page 538) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
To rotate the shape pattern
1
Press [Shape Speed], turning it on.
The display on knob 5 that was visible when [Shape] was selected changes.
2
Set the following parameter.
Knob Parameter
5 Speed
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
To change the light to a ring shape
Note
If you select Parallel or Whole (see page 118) in the <Spot Mode> group and
shaping is disabled, the Ring parameter cannot be set.
Press [Ring] and set the following parameters.
Knob Parameter Adjustment
1 Offset Offset from center position (radius)
2 Radius Radius of ring
3 Angle Rotation angle of ring
a) –1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the clockwise
direction.
Note
There is no Radius setting when Line is selected in the <Spot Mode> group.
To rotate the ring
1
Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring] was selected changes.
2
Set the following parameter.
Adjustment
Rotation direction and speed
Setting values
–100.00 to +100.00
Setting values
–6.00 to +6.00
0.00 to 6.00
a)
–8.00 to +8.00
DME Special Effect Operations
a)
121