Art Edge Settings - Sony DVS-9000 User Manual

4
To select an outline only key
Press [Outline], turning it on.
The outline only effect is enabled.

Art Edge Settings

This effect adds edges to the inside and outside of the input picture.
Note
The Art Edge function is not supported on the MVE-8000A.
Applying art edges
1
2
32
DME Special Effect Operations
Knob Parameter Adjustment
2 V Simultaneously adjust width of top
and bottom key borders
3 All Simultaneously adjust width of all
four key borders
4 Soft Softness of the key borders
5 Density Density of the key borders
To set the key border color, press [Flat Color] and adjust the following
parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
In the DME menu, select VF1 'Edge' and HF4 'Art Edge.'
The Art Edge menu appears.
Press [Art Edge], turning it on.
This enables art edges, and you can now use the knobs to adjust the
parameters.
Note
The Defocus, Blur, Key Border, and Glow effects cannot be applied to the
Art Edge sections.
Setting values
0.00 to 100.00
Value of H shown
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00