Crossing images from up to four consecutive channels in three
dimensions
Note
The three-dimensional crossing function is not supported on the MVE-8000A.
1
In the Combiner Priority menu, press [Depth], turning it on.
2
Set the following parameters.
For case "Ch1+Ch2"
Knob
1
For case "Ch1+Ch2+Ch3"
Knob
1
2
For case "Ch1+Ch2+Ch3+Ch4"
Knobs 1 and 2 set the same parameters as "For case 'Ch1+Ch2+Ch3',"
respectively. Knob 3 is additionally effective, which sets the parameter
Soft3 (in the same setting value range as with knobs 1 and 2).
Crossing images from channels 1 and 2, and channels 3 and 4 in
three dimensions
Note
The three-dimensional crossing function is not supported on the MVE-8000A.
1
In the Combiner Priority menu, press [Combiner1 Depth], turning it on.
2
Set the following parameter.
Knob
1
Parameter
Adjustment
Soft
Softness of edges of crossed
section
Parameter
Adjustment
Soft1
Softness of edges of channel 1
and channel 2 crossed section
Soft2
Softness of edges of channel 2
and channel 3 crossed section
Parameter
Adjustment
Soft1
Softness of edges of channel 1
and channel 2 crossed section
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
Global Effect Operations
135