Knob
1
2
Key Border Settings
This effect adds borders to a key, or makes the key an outline only.
Note
The Key Border function is not supported on the MVE-8000A.
Applying key borders
1
In the DME menu, select VF1 'Edge' and HF3 'Key Border.'
The Key Border menu appears.
2
Press [Key Border], turning it on.
This enables key borders, and you can now use the knobs to adjust the
parameters.
Note
The key border function and Glow function (see page 67) cannot be turned
on at the same time. Only the one most recently turned on is effective.
3
Set the following parameters.
Knob
1
Parameter
Adjustment
Inner Soft
Softness of the inside of edges
Bound Soft
Softness of the edge boundaries
Bound Soft
Parameter
Adjustment
H
Simultaneously adjust width of left
and right key borders
Setting values
0.00 to 100.00
0.00 to 100.00
Inner Soft
Setting values
0.00 to 100.00
DME Special Effect Operations
31