Signal Input Settings (Input Menu); Setting The Input Signals - Sony DVS-9000 User Manual

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.

Setting the input signals

Use the following procedure.
1
2
3
4
5
106
Setup Relating to Switcher Processor
In the Switcher>Input menu, select the input signal to which the settings
apply.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Knob Parameter Adjustment
1 Src No Input signal selection
The selected input signal appears in reverse video.
Press [Input Phase Adjust].
To adjust the phase, adjust the following parameter.
Knob Parameter Adjustment
2 Phase Input signal phase
To enable through mode, press [Through Mode], turning it on.
To make video process settings, press [Video Process].
The Switcher>Input>Video Process menu appears.
The status area shows the source number, source name, and video process
adjustment settings.
You can select the input signals set in this menu.
Setting values
1 to 80
Setting values
−16 to +16