Sony DVS-9000 User Manual page 327

3
4
Sequential names for multiple signals
When you specify a number at the end of a signal name, all of the signals in the
range selected by knobs 1 and 2 are automatically assigned names ending with
sequential numbers.
Example: To assign sequential names to source signal 2 through source signal
1) In step 2 above, set knob 1 to "2," and set knob 2 to "3."
2) Set the name of source signal 2 to "CAM2."
Setting the source name display color
1
2
Copying cross-point assign tables
The contents of a cross-point assign table can be copied to another cross-point
assign table, and vice versa.
Note
The contents of a sub table cannot be copied to the main table.
326
Setup Relating to Operations From the Control Panel
Knob Parameter
1 Source No
2 Num
Press [Source Name].
A keyboard window appears.
Enter any name of not more than 16 characters, then press [Enter].
For details of keyboard window operation, see "Menu Operations" in
Chapter 2 (Volume 1).
4
The name "CAM3" is assigned automatically to source signal 3, and the
name "CAM4" is assigned automatically to source signal 4.
In the Panel >Xpt Assign >Table Button Assign >Src Name/LCD Color
menu, turn the knobs to select the setting target.
Knob Parameter
1 Source No
2 Num
In the <LCD Color> group, select the color (Orange/Green/Yellow).
Adjustment
Source signal selection
Number of source signals to be
selected
Adjustment
Source signal selection
Number of source signals to be
selected
Setting values
1 to 128
1 to 128
Setting values
1 to 128
1 to 128