Toshiba GR200 Series Instruction Manual page 995

Rev. and Section
Date (page)
Chap. 4.7
Chap. 5.7
Chap. 8.9
Chap. 9.2.30
Chap. 10.3
Chap. 10.3
Chap. 11.10
Appendix 4
Appendix 6
0.19 Chap. 11.1
Set.30,2021 Appendix 8
0.20 Appendix 8
May 11, 2022
Change place and contents
Added the usage of
synchronization in the Clock function
Added the tool information of the Modbus
engineering in Chapter Engineering tool
Refined the signals for TIEMS, fault recording,
IEC61850 and Modbus in Monitoring function
Added the error info of Modbus communication in
Automatic supervision function on Table 9.2-63
Added the information about the IEC61850 CID
file for the Goose and LAN settings
Added the information about U16_00/01 Quality
signals on Table 10.3-6
Added new access level "Replica setting" for Busbar
replica setting
Added default mapping information in Appendix 4:
IEC61850
Added information about the Modbus mapping
information
Revised description of large LCD
Revised description of Enclosure Protection.
Added UKCA marking.
Approved
the Modbus time
H. Amoh
H. Amoh
H. Amoh
H. Amoh
H. Amoh
H. Amoh
H. Amoh
H. Amoh
H. Amoh
Y.Sonobe
H. Amoh
Checked by
by
K. Kobayashi
Sep. 25 Sep. 8
K. Kobayashi
Sep. 25 Sep. 8
K. Kobayashi
Sep. 17 Sep. 9
K. Kobayashi
Sep. 25 Sep. 8
M. Okai
Oct. 30 Oct. 30
X. Tang
Oct. 22 Oct. 20
X. Tang
Feb. 22 Feb. 9
X. Tang
Oct. 27 Oct. 19
K. Kobayashi
Sep 25 Sep. 8
G.Suzuki
Sep.30 Sep.30
G.Suzuki
May 11 May 11
Prepared
by
T. Kaneko
Aug. 25
T. Kaneko
Aug. 25
T. Kaneko
Sep. 9
T. Kaneko
Aug. 25
T. Kaneko
Oct. 30
T. Kaneko
Oct. 13
T. Kaneko
Feb. 2
T. Kaneko
Oct. 6
T. Kaneko
Aug. 25
X. Tang
Sep. 30
X. Tang
May 11