Toshiba GR200 Series Instruction Manual page 705

Time synchronization
(iii)
Time synchronization source can be selected in Time synchronization screen. The
synchronization function can be activated by configuration of the On/Off switch in this menu.
Figure 11.7-7 shows the configuration screen for the time synchronization function:
The following shows how to operate in this screen.
TimeSyncSrc menu
Time SyncSrc (Time Synchronization Source) can be changed by the following procedure.
Time Sync
10:48
_TimeSyncSrc
SNTP
SNTP
On
BI SYNC
Off
TimeSyncSrc
10:48
---
_SNTP
BI
MODBUS
IRIG-B
Figure 11.7-8 TimeSyncSrc
By using time synchronization via Ethernet with a SNTP server, the user can connect up
to a maximum of four SNTP servers. If more than one SNTP is used, the priority of the servers
can be decided in ascending order of synchronized stratum value (in order of higher-accuracy)
and select the server with the smallest value.
Time Sync
10:48
TimeSyncSrc
SNTP
SNTP
On
BI SYNC
Off
MODBUS SYNC
Off
IRG SYNC
Off
Figure 11.7-7 Time synchronization setting
(1) Move cursor to the TimeSyncSrc menu and press ENTER.
1/5
+
+>
+>
(2) The TimeSyncSrc menu is composed of "---", SNTP, BI, MODBUS
and IRIG-B.
1/5
Note: When "---" is selected, it means that time synchronization
is not operated.
- 691 -
1/5
+
+>
+>
+
+>
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
6F2S1931 (0.20)