Toshiba GR200 Series Instruction Manual page 515




Table 9.2-64 Detailed error information in IEC1850error
Error#
0002 Function error found
Failure occurred on going through the
0003
selection process with regard to the protocol
Failure occurred during initialization of
0004
protocol process
Failure for opening file
0005
Failure of access
0006
0007 No buffer space
No space left in the buffer provided for the
0008
SSP mapping
Failure of memory allocation in the memory
0009
dynamically
Check sum errors
000A
000B Failure of object search
Failure of the defining of data type
000C
The second of that (i.e., "0004") is a reason (see Table 9.2-64), and it turns
out the 61850 initialization.
The top right and the middle left parts are the Data ID of the reason (i.e.,
"51200131" and "03011001"; the user can combine them into "512001
3103011001").
The others are used to show the name of the 61850 logical data. Figure
9.2-1 has "4747494F, 32245354, 7456616C" codes, so the user can convert
the codes to the "GGIO2$STtVal" message using Hexadecimal to ASCII
conversion method.
Reasons of errors
messages
- 501 -
Error#
Erroneous index being used in the data
000D
for the protocol stack designated
000E Time out
000F Going through the process
0010 Found invalid arguments
0011 Found the data type not being supported
Failure of the acquisition of the authority
0012
right
0013 Failure occurred on the setting process
0014 Failure of the event registration
0015 No event occurred
0016 Restarting
0017 Communication error
6F2S1931 (0.20)
Messages
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)