Hot-Standby, PRP, etc.
Note: Select a LAN module designed for PRP/HSR/RSTP when the PRP/HSR/RSTP
‡
communication is required("L or N" code at position E). When required the Hot-
standby communication, select dual LAN modules by referring Positions E and F.
Note: Module locations can be identified by positon codes in brackets. For the IED case
examples, with regard to the Max. Dual ports of MainUnit and the Dual ports with
LAN for Local PC, a 100Base-TX/1000Base-T module is mounted at C11 when "14"
code is chosen at Positon E&F. To identify the locations C11—C25 in the IED, see
Figure 4.1-2 and Figure 4.1-3 (p. 251 or 252)
- 956 -
6F2S1931 (0.20)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)