Toshiba GR200 Series Instruction Manual page 296

How to set the settings for binary input circuits
(vi)
Figure 4.4-3 illustrates an example of the binary IO module arrangement for the binary input
circuit printed circuit boards (PCBs); it illustrates the setting targets are on BIO5A at IO#1
and BIO5A at IO#3. The user should key the settings with regard to BIO5A using the setting
tables for IO_SLOT1 and IO_SLOT3.
IO_SLOT1
Setting table (input)
Setting targets: BI1–BI9
and Common.
a. Setting targets for BIO5A (IO#1)
Figure 4.4-3 BO and BIO setting tables related to IO_slot1 and IO_slot3
The user should choose the setting items of reference (i.e., binary input circuits #1 to #9)
from IO_SLOT1 and IO_SLOT3 setting tables. The setting operation via the IED screen is
discussed later. (See chapter
c. Setting targets for BIO5A (IO#3)
User interface: I/O setting sub-menu
- 282 -
6F2S1931 (0.20)
IO_SLOT3
Setting table (in & out)
Setting targets: BI1–B9
and Common.
)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)