Toshiba GR200 Series Instruction Manual page 513

Supervision of link redundant entity (LRE error)
9.2.29
Operation of the LRE is checked and the error message is screened when the LRE does not
operate correctly or wrong data is written in the FPGA.
†Note: For more information about the LRE, see Chapter
operation
Error level
(i)
Generally, the default error level has been set at level 1 (Serious error), but the user can
program the level using settings [CHK_LRE:LVl]; then, set On for the settings [CHK_LRE:Sw].
Error message
(ii)
When detecting an error, an error message can be shown on the LCD screen and an LED is lit.
Table 9.2-60 Error messages provided by the supervisor in CHK_LRE
Message and level
CP*_(LRE) error
Error level
Table 9.2-61 Detailed information in Hexadecimal in CHK_LRE
Display
area
00000001: Type error in FPGA
Top
00000002: Port state error in redundant module
row
00000004: Mode error in redundant module
Middle
(No information is displayed)
row
Bottom
(No information is displayed)
row
.
Meaning of the information
Detection of the failure in the LRE instructed with "CP*_" as
follows:
CP1M: CPU module
Serious error (Level 1)
Meaning of the detailed information
Left column
- 499 -
6F2S1931 (0.20)
Communication Protocol: LAN
Right column
FPGA type number in CP1M
(No information is displayed)
(No information is displayed)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)