Toshiba GR200 Series Instruction Manual page 23

Summary of GRB200
The summary of descriptions in section 1.1(i) and 1.1(ii) are provided in Table 1.5-1. The
module specification can be divided into common features and specific features. Refer to
Chapters "Technical description" for the specifications of the module.
Table 1.5-1 MainUnit and SubUnits structure and their module configuration
Case and
Module type
VCT21B:
can input four three-phase voltages in
one module.
VCT23B:
VCT can input four three-phase currents in
one module.
VCT48B:
can input two three-phase currents and
two three-phase voltages in one module.
Two COM ports:
can be provided for the network.
LAN for Local PC:
COM
can be provided for local PC engineering.
OPT2:
is provided to connect with SubUnits.
Maximum of eight BIO modules can be used for monitoring and control. Modules
BIO
are decided based on the number of input and output contacts.
PWS One module can be used
HMI Mounted on the front surface of MainUnit
†Note: Embedding the relay applications depends of the choice of the ordering code. See
Appendix: Ordering.
MainUnit configuration
- 9 -
SubUnit configuration
VCT23B:
can input four three-phase currents in
one module.
OPT2 is provided to connect with
MainUnit.
One module can be used
Not available
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
6F2S1931 (0.20)