Toshiba GR200 Series Instruction Manual page 572

For example, to let a device execute "Select", "Operate" and "Cancel" commands
from the sever through "CSWI4" and transmit the information to an IED, the user
should map an input point (Data ID) to several variables of "CSWI4" (See Figure
10.3-22). Mapping period for Control shall be 100.
*Note: For more information of the input points, see chapter
Control and monitoring application
SBOW
Oper
Cancel
Figure 10.3-22 Control function mapping
To complete the setting for control function, after mapping data, the user needs
to set BI, BO† in the GR-TIEMS ->Setting.
†Note: For more information for the BI, BO, see Chapter
module
.
, if available.
Mapping
DE V01_ CONTROL_ RE Q
- 558 -
6F2S1931 (0.20)
General control function or
Input DataID
Technical description: Binary IO
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)