03.06
SPL
Fig. 10-4
In the "Variable" selection box, you can select:
$A_INSE(P) corresponds to simultaneous selection of
$A_INSE
$A_INSEP
and effectively the same for the other variables:
$A_OUTSE(P)
$A_INSI(P)
$A_OUTSI(P)
$A_MARKERSI(P)
The variables that have been selected and the associated bit areas are saved and
are taken into account when subsequently selecting the screen.
Using the select key, the following formats can be selected in the variable rows
B
H
D
The selected format is applicable for the particular variable, as each variable can
be assigned an individual display format.
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Status display SPL
upper line, origin of the NCK and
lower line, origin of the PLC
Binary
Hexadecimal
Decimal, can be selected.
10.1 Troubleshooting procedure
Diagnostics
10-373