Siemens SINUMERIK 840D sl Function Manual page 273

03.06
Description of the parameterization of the SGA machine data MD 36980 to MD
36990
Coding of the output assignment
is mm
i Inversion
s Segment No.
mm Module No.
xx Sub-
module No.
nn I/O No.
Note
The maximum input value for all axial NCK_SGA configuring machine data is
84010220.
An incorrect entry will be detected the next time the system boots and flagged
using Alarm 27033.
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
8.1 Machine data for SINUMERIK 840D sl
xx nn Permissi-
ble values
0, 8
0, 4
01
01–02
01–20
Data Description
Explanation
0: No inversion
8: Inversion before processing
4: Internal image in the system
memory (system variable)
01: Addressing the internal SPL
interface $A_INSI
Index of the system variable word
(each 32 bit)
Bit number in the system variable
word $A_INSID[xx]
8-273