Siemens SINUMERIK 840D sl Function Manual page 187

03.06
SPL-SGE assignment
With this assignment, it is defined in which SPL-SGE ($A_INSE/$A_INSEP) the
seamless (without gaps) F net data selected using the F net data filter are trans-
ferred.
The assignment is made using machine data:
S MD 10388: $MN_PROFISAFE_IN_ASSIGN[Index],
(input assignment: F net data signals to $A_INSE)
Input format: 00 aaa bbb
– aaa: Most significant SPL-SGE $A_INSE/INSEP[aaa]
– bbb: Least significant SPL-SGE $A_INSE/INSEP[bbb]
Example
8 F net data signals of the 1st sub-slot filtered from the F net data of the F-DI mo-
dule are transferred in the SPL-SGE from $A_INSE[1]/INSEP[1]).
S MD10386 $MN_PROFISAFE_IN_ADDRESS[5] = 05 00 0090
S MD13300 $MN_PROFISAFE_IN_FILTER[5]
S MD10388 $MN_PROFISAFE_IN_ASSIGN[5]
SPL-SGE $A_INSE/INSEP
MD: ...IN_ASSIGN[5]
Filter setting for the 1st sub-slot
MD: ...IN_FILTER[5]
F net data signals
of the F-DI module
MD: ..._IN_ADDRESS[5]
Fig. 7-14 Transfer: Filtered F net data signals in SPL-SGE
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
32
00000000 00000000 00000000 10101010
Bit 31
00000000 00001111 00000000 00001111
Bit 31
Sub-slot[1] 10101010 10101010
Connecting Sensors/Actuators
7.2 Connecting I/O via PROFIsafe
= 000F 000F
= 008 001
Bit0
Sub-slot[0] Bit0
10101010 10101010
1
7-187