Diagnostics - Siemens SINUMERIK 840D sl Function Manual

Data Description
8.2 Parameters for SINAMICS S120
General diagnostic parameters on the CU
r9710[0...1] SI motion, diagnostics result list 1
Displays result list 1 where for a crosswise data comparison with the control,
led to an error.
[0]: Result list (control)
[1]: Result list (drive)
Units: Default value:
– –
Bit Signal name
00 Actual value > Upper limit SBH
01 Actual value > Lower limit SBH
02 Actual value > Upper limit SE1
03 Actual value > Lower limit SE1
04 Actual value > Upper limit SE2
05 Actual value > Lower limit SE2
06 Actual value > Upper limit SG1
07 Actual value > Lower limit SG1
08 Actual value > Upper limit SG2
09 Actual value > Lower limit SG2
10 Actual value > Upper limit SG3
11 Actual value > Lower limit SG3
12 Actual value > Upper limit SG4
13 Actual value > Lower limit SG4
16 Actual value > Upper limit SBR
17 Actual value > Lower limit SBR
See also: C01711 "SI motion: Defect in a monitoring channel".
8-298
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Minimum value: Maximum value:
– –
Checksum:
Protection level:
No
4
Data type: Effective:
U32 –
© Siemens AG, 2006. All rights reserved
03.06