Cycle971 Measuring Cycle Parameters - Siemens SINUMERIK 840D sl Programming Manual

Parameter lists
3.1 Overview of measuring cycle parameters
3.1.13

CYCLE971 measuring cycle parameters

PROC CYCLE971(INT S_MVAR,INT S_KNUM,INT S_PRNUM,INT S_MA,INT S_MD,REAL S_ID,REAL S_FA,REAL
S_TSA,REAL S_VMS,REAL S_TZL,REAL S_TDIF,INT S_NMSP,REAL S_F1,REAL S_S1,REAL S_F2,REAL
S_S2,REAL S_F3,REAL S_S3,INT S_EVNUM,INT S_MCBIT,INT _DMODE,INT _AMODE) SAVE DISPLOF
Table 3- 13 CYCLE971 call parameters
No. Screen form Cycle
parameters parameters
1 S_MVAR
2 Selection S_KNUM
3 Icon+ S_PRNUM
number
4 X0 S_MA
250
1)
Meaning
Measuring version
Values: UNITS:
0 = Calibrate tool probe
1 = Measure tool with stationary spindle (length or radius)
2 = Measure tool with rotating spindle (length or radius), see parameters
to
S_F1 S_S4
TENS: Measurement in the machine coordinate system or workpiece
coordinate system
0 = Measurement in MCS (machine-related), measure tool or calibrate tool
probe
1 = Measurement in WCS (workpiece-related), measure tool or calibrate tool
probe
HUNDREDS:
0 = 0
THOUSANDS:
0 = 0
TEN THOUSANDS:
0 = 0
HUNDRED THOUSANDS: Calibrate tool probe automatically
0 = Do not calibrate tool probe automatically
1 = Calibrate tool probe automatically
Offset variant
2)
Values: UNITS: Tool offset
0 = No specification (tool offset in geometry)
1 = Tool offset in wear
Number of the field of the probe parameters (not probe number)
Measuring axis, offset axis
Values: UNITS: Number of the measuring axis
1 = 1st axis of the plane (for G17 X)
2 = 2nd axis of the plane (for G17 Y)
3 = 3rd axis of the plane (for G17 Z)
TENS:
0 = 0
HUNDREDS: Number of the offset axis
1 = 1st axis of the plane (for G17 X)
2 = 2nd axis of the plane (for G17 Y)
4)
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Measuring cycles