Siemens SINUMERIK 840D sl Programming Manual page 20

Description
1.6 Probes that can be used
3D_PROBE (multi probe)
Representation
MONO PROBE
Representation
L_PROBE
Representation
The tool length is the reference point of the tool holder with the equator of the probe ball.
20
Properties
Application:
Type:
Tool length:
Offset angle:
Switching directions:
Properties
Application:
Type:
Tool length:
Offset angle:
Switching directions:
Properties
Application:
Type:
Tool length:
Offset angle:
Switching directions:
Radius in the plane
(length of the boom):
Radius of the probe ball in
the tool direction:
Feature
Universal
$TC_DP1[ ]=710
in Z (for G17)
$TC_DP10[ ] = 0
$TC_DP25[ ] = hex 0x00000000
Feature
Alignment of the switching direction when
measuring
$TC_DP1[ ]=712
in Z (for G17)
$TC_DP10[ ] = 0 to 359.9 degrees
$TC_DP25[ ] = hex 0x00120000
Feature
Towing measurement in +Z
$TC_DP1[]=713
in Z (for G17)
$TC_DP10[ ] = 0 to 359.9 degrees
$TC_DP25[ ] = hex 0x00220000
$TC_DP6[ ]
$TC_DP7[ ]
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Measuring cycles