Behavior On Block Search, Dry Run, Program Testing, Simulation - Siemens SINUMERIK 840D sl Programming Manual

Description

1.3 Behavior on block search, dry run, program testing, simulation

1.3 Behavior on block search, dry run, program testing, simulation
Function
The measuring cycles are skipped during execution if one of the following execution modes
is active:
 "Trial run"
 "Program test"
 "Block search"
Simulation
The simulation of the measuring cycles is realized in the user interface (HMI) in the "Program
Editor" area.
Following settings are possible in the channel-specific setting data SD 55618:
● SD 55618 $SCS_MEA_SIM_ENABLE = 0
● SD 55618 $SCS_MEA_SIM_ENABLE = 1
12
($P_DRYRUN=1)
($P_ISTEST=1)
($P_SEARCH=1), only if $A_PROTO=0.
The measuring cycle is skipped, the HMI simulation shows no path motion of the probe.
The measuring cycle is executed, the HMI simulation shows the corresponding path
motion of the probe.
No measurements, tool or work offsets are made.
Actived functions such as "measuring result display" or "travel with collision monitoring"
are not implemented.
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Measuring cycles