Deleting A Traffic Control Class; Managing Traffic Control Devices - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Parameter
tos-minimize-cost
tos-normal-service
default
tcp-ack
tos-value { tos-value }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.39.4.3

Deleting a Traffic Control Class

To delete a traffic control class, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the traffic control class by typing:
no qos traffic-control advanced-configuration tcclasses name
Where:
• name is the name of the traffic control class entry
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.39.5

Managing Traffic Control Devices

Traffic control devices define devices used for traffic shaping.
NOTE
Traffic control devices can only be configured in advanced mode. For more information about setting
the traffic control mode, refer to
Deleting a Traffic Control Class
Description
Value/mask encoding: 0x04/0x04
Synopsis: true or false
Default: false
Value/mask encoding: 0x02/0x02
Synopsis: true or false
Default: false
Value/mask encoding: 0x00/0x1e
Synopsis: true or false
Default: false
<emphasis role="bold">One default class</emphasis> per interface <emphasis
role="bold">must</emphasis> be defined.
Synopsis: true or false
Default: false
All TCP ACK packets into this class. This option should be
specified only once per interface.
Synopsis: A string
A custom classifier for the given value/mask.
The values are hexadecimal, prefixed by '0x'.
Ex.:
0x56[/0x0F]
Section 5.39.1, "Enabling and Configuring Traffic
Chapter 5
Setup and Configuration
Control".
575