Deleting A Redistribution Metric; Managing Bgp - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
routing isis area name redistribute source
Where:
• name is the unique name for a routing process that belongs to a specific router.
• source is the protocol transmitting packets over the IS-IS route. Options include bgp, connected, kernel,
ospf, rip, and static.
3. Configure the following parameter(s) as required:
Parameter
is-type { is-type }
metric-type { metric-type }
metric { metric }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.18.12.3

Deleting a Redistribution Metric

To delete a redistribution metric for an IS-IS area, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the metric by typing:
no routing isis area name redistribute source
Where:
• name is the unique name for a routing process that belongs to a specific router.
• source is the protocol transmitting packets over the IS-IS route. Options include bgp, connected, kernel,
ospf, rip, and static.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.19

Managing BGP

The Border Gateway Protocol (BGP) as defined by
scalable routing protocol. BGP is designed to manage a routing table of up to 90000 routes. Therefore, it is used
in large networks or among groups of networks which have common administrative and routing policies. External
BGP (eBGP) is used to exchange routes between different Autonomous Systems (AS). Interior BGP (iBGP) is
used to exchange routes within autonomous system (AS).
BGP is used by the bgpd daemon to handle communications with other routers. The daemon also determines
which routers it prefers to forward traffic to for each known network route.
Deleting a Redistribution Metric
Description
Synopsis: { level-1-only, level-2-only, level-1-2 }
IS type of the IS-IS information, specified as level-1-only, level-2-
only or level-1-2. If not provided, uses IS type from area.
Synopsis: { internal, external }
Default: external
The IS-IS metric type for redistributed routes. Default is external
Synopsis: An integer between 0 and 16777214
The metric for redistributed routes.
RFC 4271 [http://tools.ietf.org/rfc/rfc4271.txt] is a robust and
Chapter 5
Setup and Configuration
313