Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Parameter
4.
If custom configuration settings are required for the host group client, refer to
Custom Host Group Client
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.15.11.5
Deleting a Host Group
To delete a host group, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Delete the host group by typing:
no services dhcpserver host-groups name
Where:
• name is the name of the host group
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.15.12
Managing Custom Host Group Client Configurations
Custom configuration settings can be set for each host group client.
The following sections describe how to configure and manage custom host group client configurations on a
DHCP server:
•
Section 5.15.12.1, "Viewing a List of Custom Host Group Client Configurations"
•
Section 5.15.12.2, "Adding Custom Host Group Client Configurations"
•
Section 5.15.12.3, "Deleting Custom Host Group Client Configurations"
Section 5.15.12.1
Viewing a List of Custom Host Group Client Configurations
To view a list of custom configurations for host group clients on the DHCP server, type:
show running-config services dhcpserver host-groups options client custom
If custom configurations have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver host-groups
services
dhcpserver
host-groups APE-LM-INT-NIC
options
subnet SUB2
client
256
Description
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
Configurations".
RUGGEDCOM ROX II
CLI User Guide
Section 5.15.12, "Managing
Deleting a Host Group
Advertisement
Table of Contents
Troubleshooting
