Viewing A List Of Prefix Lists; Viewing A List Of Prefix Entries - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
• Section 5.20.3.3, "Adding a Prefix List"
• Section 5.20.3.4, "Adding a Prefix Entry"
• Section 5.20.3.5, "Deleting a Prefix List"
• Section 5.20.3.6, "Deleting a Prefix Entry"
Section 5.20.3.1

Viewing a List of Prefix Lists

To view a list of prefix lists for dynamic RIP routes, type:
show running-config routing rip filter prefix-list
If prefix lists have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config routing rip filter prefix-list | tab
NAME
-------------------------------------------------------------------------
list-permit-lan-22
list-withdraw-lan-11
!
If no prefix lists have been configured, add lists as needed. For more information, refer to
"Adding a Prefix List".
Section 5.20.3.2

Viewing a List of Prefix Entries

To view a list of entries for dynamic RIP prefix lists, type:
show running-config routing rip filter prefix-list name entry
Where:
• name is the name of the prefix list
If entries have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config routing rip filter prefix-list test entry | tab
SEQ ACTION SUBNET
---------------------------------------------
5 permit 192.168.40.0/24
6 deny 192.168.5.21/32
!
!
If no entries have been configured, add entries as needed. For more information, refer to
"Adding a Prefix Entry".
342
DESCRIPTION SEQ ACTION
-
100 permit
-
100 permit
200 permit
LE GE
32 -
- -
SUBNET LE GE
192.168.33.0/24 - -
192.168.33.0/24 - -
192.168.33.0/24 32 -
RUGGEDCOM ROX II
CLI User Guide
Section 5.20.3.3,
Section 5.20.3.4,
Viewing a List of Prefix Lists