RUGGEDCOM ROX II
CLI User Guide
Parameter
port-udp { port-udp }
password { password }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 4.8.2
Configuring RADIUS Authentication for PPP Services
To configure RADIUS authentication for PPP services, do the following:
IMPORTANT!
Passwords are case-sensitive.
1.
Make sure the CLI is in Configuration mode.
2.
Type the following:
global ppp radius
Configure the primary or secondary RADIUS server by typing either primary or secondary and
3.
configuring the following parameter(s) as required:
Parameter
address { address }
port-udp { port-udp }
password { password }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 4.8.3
Configuring RADIUS Authentication for Switched Ethernet
Ports
To configure RADIUS authentication for switched Ethernet ports, do the following:
IMPORTANT!
Passwords are case-sensitive.
1.
Make sure the CLI is in Configuration mode.
2.
Type the following:
Configuring RADIUS Authentication for PPP Services
Description
Synopsis: An integer between 1 and 65535
Default: 1812
The network port of the server.
Synopsis: A string
The password of the RADIUS server.
Description
Synopsis: A string 7 to 15 characters long
The IPv4 address of the server.
Synopsis: An integer between 1 and 65535
Default: 1812
Synopsis: A string
Chapter 4
System Administration
177