Configuring Subnet Options - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• name is the name of the subnet
3. Configure the following parameter(s) as required:
Parameter
network-ip { network-ip }
shared-network { shared-network }
4. Configure the options for the subnet. For more information, refer to
Options"
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.15.7.3

Configuring Subnet Options

To configure options for a subnet, do the following:
NOTE
Options set at the subnet level override options set at the DHCP server level.
1. Make sure the CLI is in Configuration mode.
2. Navigate to services » dhcpserver » subnet » {name} » options, where {name} is the name of the subnet.
3. Configure the following parameter(s) as required:
Parameter
unknown-client { unknown-client }
authorize-server
option82
default { default }
maximum { maximum }
4. Configure the client for the subnet. For more information, refer to
Client"
5. Configure one or more IP pools to the subnet. For more information, refer to
Pool"
6. Configure one or more IP ranges to the subnet. For more information, refer to
IP Range to a DHCP Subnet"
Configuring Subnet Options
Description
Synopsis: A string 9 to 18 characters long
The network IP address for this subnet.
The shared-network that this subnet belongs to.
Description
Synopsis: { allow, deny, ignore }
The action to take for previously unregistered clients.
Synopsis: typeless
Enables/disables the server's authorization on this client. If enabled, the server will send
deny messages to the client that is trying to renew the lease, which the server knows the
client shouldn't have.
Synopsis: typeless
Enables/disables the NAK of option 82 clients for this subnet.
Default: 600
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Setup and Configuration
Section 5.15.7.3, "Configuring Subnet
Section 5.15.7.4, "Configuring a Subnet
Section 5.15.13.2, "Adding an IP
Section 5.15.14.2, "Adding an
Chapter 5
245