5-8-3. Position Adjustment (Electric Shift by Touch Panel)
This adjustment is performed for adjusting the center position of image when zooming and so on in the
case of using the V shift and H shift with the lens shift block.
1. Tap the "Configuration" tab.
2. Tap [Projector|$2D%] → [Set|Function].
The Set Function screen is displayed.
[Projector|$2D%]
Screen example
[Set|Function]
[Electric|Shift]
3. Tap [Electric|Shift].
The Electric Shift screen is displayed.
Screen example
4. Adjust the V shift or H shift using the slide bar or the [+][_].
Digital Cinema Dual System
5-27 (E)