How to open/close the 3D filter in the right direction
Before attaching the 3D filter bracket assembly, change the direction of the 3D filter holder.
1. Remove the four screws, then remove the 3D filter holder.
PSW
4 x 10
2. Turn the 3D filter holder 180 degrees.
3. Attach the 3D filter holder with the four screws.
4. Attach the 3D filter bracket assembly. (Refer to step 1 in Section 2-8-2.)
2-26 (E)
Lock pin
3D filter holder
PSW
4 x 10
3D filter holder
Lock pin
PSW
4 x 10
PSW
4 x 10
Digital Cinema Dual System