System Startup And Login; Startup - Sony LKRA-009 Installation Manual

5-2. System Startup and Login

5-2-1. Startup

When starting up the projection system, turn on the main power of the main projector and sub-projector,
start the server, and then login to the system. You can turn on the main power of either projector first,
main projector or sub-projector.
1. Set the power switch on the rear of the projector to ON (I) to turn on the main power.
When the projector becomes standby state after the power is turned on, the MAIN indicator, LAMP
indicator, and IMB indicator light up in red.
n
If the MAIN indicator does not light up in red even though the power switch is set to ON, an error
may have occurred in the standby power supply.
Identify the problem block by referring to Section 2-11 in the Service Manual of the Digital Cinema
Projector Package SRX-R515P/R510P.
2. Push the SYSTEM SW switch on the front of the server to turn on the power.
The POWER indicator lights up in green. When the server is started, the Login screen is displayed on
the monitor.
Projector
MAIN indicator
IMB indicator
LAMP indicator
Power switch
Main projector
Digital Cinema Dual System
MAIN indicator
IMB indicator
LAMP indicator
Power switch
Sub-projector
Server
SYSTEM SW switch
POWER indicator
Touch panel monitor
Example of Login screen
5-5 (E)