3. Insert the lamp and close the lamp door.
n
. When holding the lamp, be careful not to touch the connector contact portion.
. Push near the PUSH mark of the lamp to insert it securely.
4. Attach the remaining lamps by repeating steps 2 and 3.
5. To install the intake grille (A), reverse the removal procedure.
2-4. Installation of Touch Panel Monitor
1. Attach the TPC mounting plate with the four screws.
Touch panel monitor
2-6 (E)
Lamp
PUSH mark
Connector contact portion
TPC mounting plate
Screws
PUSH
Digital Cinema Dual System