7-4-3. Precautions
Show starting from the mid of SPL
If show starts from the mid of SPL, automation cue set before the show start point will not be executed.
When 4D system is to be controlled by network automation cue, some 4D systems may require starting
command.
Send the command in the following procedure.
1. Tap the "Status" tab.
2. Tap [Auditorium] → [Automation].
The Automation screen is displayed.
3. Tap a button of the intended network automation cue.
The required control command is issued.
Show stopping in the mid of SPL
If show stops in the mid of SPL, automation cue set after the show stop point will not be executed. When
4D system is to be controlled by network automation cue, some 4D systems may require stopping com-
mand.
Send the command in the following procedure.
1. Tap the "Status" tab.
2. Tap [Auditorium] → [Automation].
The Automation screen is displayed.
3. Tap a button of the intended network automation cue.
The required control command is issued.
Digital Cinema Dual System
7-9 (E)