Sony LKRA-009 Installation Manual page 38

13. Touch the projector chassis to discharge the static electricity.
14. Insert the DIF-243 board all the way in, then secure it with the two screws removed in step 8.
n
Before installing the DIF-243 board, check that the harness is routed through the gap of the panel.
PSW
4 x 10
Tamper harness
DIF-243 board
15. Attach the shield plate assembly 1 to the main projector with the six screws removed in step 7 of the
main projector.
16. Attach the shield plate assembly 2 to the sub-projector with the six screws removed in step 7 of the
sub-projector.
Shield plate assembly 1
(for main projector)
2-18 (E)
Gap
PSW
4 x 10
PSW
4 x 10
Shield plate assembly 2
(for sub-projector)
Tamper harness
Digital Cinema Dual System