Startup And Login - Sony LKRA-009 Installation Manual

5-1-1. Startup and Login

Turn on the power switch of the main projector and sub-projector, then start the server. Login to the
system with the username "trsetup". You can turn on the main power of either projector first, main projec-
tor or sub-projector.
1. Set the power switch on the rear of the projector to ON (I) to turn on the main power.
When the projector becomes standby state after the power is turned on, the MAIN indicator, LAMP
indicator, and IMB indicator light up in red.
n
If the MAIN indicator does not light up in red even though the power switch is set to ON, an error
may have occurred in the standby power supply.
Identify the problem portion by referring to Section 2-11 in the Service Manual of the Digital Cinema
Projector Package SRX-R515P/R510P.
2. Push the SYSTEM SW switch on the front of the server to turn on the power.
The POWER indicator lights up in green. When the server is started, the "Login" screen is displayed
on the monitor.
3. Login to the system with the username "trsetup".
Touch the "User ID" input column on the login screen and type "trsetup" from the software keyboard.
Type "setup" in the "Password" input column and tap [Login].
Projector
MAIN indicator
IMB indicator
LAMP indicator
Power switch
Main projector
5-2 (E)
MAIN indicator
IMB indicator
LAMP indicator
Power switch
Sub-projector
Server
SYSTEM SW switch
POWER indicator
Touch panel monitor
Example of Login screen
Digital Cinema Dual System