2. Attach the TPC arm block assembly with the four screws.
3. Attach the two cable clampers.
TPC arm block assembly
PSW4 x 10
Cable clamper
Cable clamper
t
The direction of the touch panel monitor can be changed by rotating the TPC arm block assembly.
(1) Remove the three screws.
(2) Rotate the TPC arm block assembly in the direction of the arrow.
(3) Fix the TPC arm block assembly with the three screws.
PSW4 x 10
TPC arm block assembly
PSW4 x 10
2-7 (E)
Digital Cinema Dual System