Sony LKRA-009 Installation Manual page 116

n
Set a projector in a standby state.
To enter the standby state, enter a Projector Control screen in the order of "Status" tab → [Auditorium]
→ [Projector], then tap [Standby].
[Standby]
Screen example
2. Press the [Ctrl] key, [Alt] key and [F2] key on the USB keyboard simultaneously. ([Ctrl] + [Alt] +
[F2])
The computer screen is displayed.
3. Type the user ID and password to log in.
t
For the user ID and password, contact your local Sony Sales Office/Service Center.
Screen example
4. Execute the command below and open "SMSMgrServer_custom.ini".
#vi/home/sms/apps/conf/SMSMgrServer_custom.ini
5. When changing an ini file, move the cursor to the line to be changed, then press the [i] key on the
USB keyboard. The current state then enters the edit mode.
6. Press the [Esc] key on the USB keyboard, enter ":wq", and press the [Enter] key.
The contents of change are saved and the edit mode is terminated.
7. Execute the command below to reboot this system.
#reboot
8. Remove the USB mouse and USB keyboard.
5-46 (E)
Type the user ID and password.
Digital Cinema Dual System