Sony SRX-R220 Manuallines
Extended shutdown
Hide thumbs
Also See for SRX-R220:
- Operating instructions manual (28 pages) ,
- Brochure (16 pages) ,
- Brochure & specs (16 pages)
Related Manuals for Sony SRX-R220
Summary of Contents for Sony SRX-R220
- Page 1 Sony Projector Extended Shutdown Guidelines Shutdown, Maintain and Restart Sony Projectors Sony Electronics...
- Page 2 Prior to Shutdown SRX-R220/320 SRX-R515 SRX-R815...
- Page 3 SRX-R220/320 Exhaust Fan • Turn off exhaust fan LMT-200/300- Lithium Battery • Confirm BATT Alarm is not lit before shutdown • If BATT Alarm is on, replace the BATT...
- Page 4 SRX-R515 Exhaust Fan • Turn off exhaust fan XCT-S10/XCT-M10 Lithium Battery • Confirm BATT Alarm is not lit before shutdown • If BATT Alarm is on, replace the BATT...
- Page 5 SRX-815 Chiller Option 1 (In case of distilled water only) • Drain the projector and leave dry until restarting theater operations Option 2 (Recommended) • Leave coolant and distilled water in the projector during extended shutdown • Run the projector for 2 hours a week during shut down Option 3 •...
-
Page 6: Returning To Service
Returning to Service SRX-R220/320 SRX-R515 SRX-R815... - Page 7 • Clean around the lens with air ３D convergence check (Single&DS) • Check and adjust HDD condition • Confirm that there is no error on the Status screen • If there is no 1.7TB (around 10MB), contact Sony NOC to perform RAID initialization. RAID builder->RAID Formatter...
- Page 8 SRX-R515 Screening Check • Check DCP Dust • Check around the intake port and lens • Clean around the lens with air ３D convergence check (Single & DS) • Check and adjust after adjusting the room temperature appropriately...
- Page 9 SRX-815 Chiller Distilled water only 1. Inject distilled water and run for 15 minutes → check flow rate and filter visually (Check for dirt) 2. If dirty, perform the manual cleaning according to TN (DPPJ19-210) Start operation if not dirty (strongly recommend to add Nybrine Z1 coolant) Coolant (Optishield) •...
- Page 10 SRX-R815 Projector Screening Check • Check DCP • Check black image (0% image by PGUUT) • If any issue on black image, readjust Black & Dark UF after taking picture (except optical compensator adjustment) • Dust • Check around the intake port and lens •...
- Page 11 All Projector Models HDD condition • Confirm that there is no error on the Status screen • Check for errors • When UPS power supply has been stopped for a long time, two days before the server system is up and running, start the UPS and complete the charging Confirm Operation Including Audio and Theater Automation •...
- Page 12 SONY is a registered trademark of Sony Corporation. Names of Sony products and services are the registered trademarks and/or trademarks of Sony Corporation or its Group companies. Other company names and product names are registered trademarks and/or trademarks of the respective companies.