1-6. Installation of Carrying Handle
When moving the projector to the pedestal after unpacking, attach the carrying handles as required for
transporting it.
n
The carrying handles cannot be attached to both back/forth and right/left at the same time.
Parts information
. Handle arm: 4-164-849-02:
. Pipe (short): 4-164-850-02:
. Pipe (long): 4-164-851-02:
. M8 bolt:
2-590-262-02 or -11: 4 pcs
In the case of attaching the pipe (long) to the right and left side of projector
1. Loosen the nut in the direction of the arrow A, then insert the handle arm in the direction of the
arrow B.
2. Tighten the nut to fix the handle arm.
3. Attach the handle arm to the adjuster of other three portions by repeating steps 1 and 2.
Adjuster
Digital Cinema Dual System
4 pcs
2 pcs
2 pcs
Nut
B
A
Handle arm
1-9 (E)