Accessories - Sony LKRA-009 Installation Manual

Digital cinema dual system
Hide thumbs Also See for LKRA-009:
Table of Contents

Advertisement

System configuration of dual system
SRX-R515P is used as the main projector and SRX-R515 is used as the sub-projector. When viewed from
the back side (touch panel monitor side), the projector that has the AUDIO OUTPUT terminal at the
connection on the right side is SRX-R515P and the projector that does not have the AUDIO OUTPUT
terminal is SRX-R515.
In the 3D projection, the main projector displays the image of the left eye, and the sub-projector displays
the image of the right eye respectively.
The conduit consists of the conduit box and conduit cable.
n
. Dual system cannot work properly in one projector. In this system, the two projectors are supposed to
always operate simultaneously.
In the 2D projection, the same image is output from the two projectors. In the 3D projection, the image for
the left eye is output from one projector and the image for the right eye is output from the other projector.
. Be sure to use the lens of the same model for the two projectors.
. Attach the 3D filter for the left eye to the main projector and the 3D filter for the right eye to the sub-
projector.
. The image distortion correction data is saved in the function memory.
Therefore, perform the image distortion correction adjustments as many as the number of the registered
function memory.

1-2. Accessories

The following accessories are supplied with this system.
[Digital Cinema Projector SRX-R515]
. Key for removing panels (5)
. Safety regulations (1)
[Digital Cinema Server XCT-S10]
. Feet (1 set)
. PCI express cable (2 m) (1)
[Touch Panel Monitor LKRA-007]
. AC adaptor (1)
. VGA cable (1)
. USB cable (1)
[Dual System Accessory Kit LKRA-010]
. Tamper harness (3)
. Conduit box mounting screw (K2.6 x 5) (4)
. Conduit support mounting screw (bolt 8 x 12) (4)
[3D filter and Holder LKRA-011]
. Filter bracket mounting screw M8 (8)
. Filter mounting screw M4 (8)
. Spring washer (8)
[Projector Auto Calibration Box LKRA-PCAB1]
. AC adaptor (1)
. Connecting cable (2)
1-2 (E)
. TPC arm (1 set)
. Cable clamper (2)
. Ethernet cable (2 m) (1)
. Hexagonal spacer (8)
. Washer (8)
Digital Cinema Dual System

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents